Max Warehouse reserves the right to change this offer at any time. Read more on shipping policy or return policy
product
https://www.maxwarehouse.com/products/3-pack-3-8-in-derlin-compression-sleeves66516635812353-Pack 3/8-In. Derlin Compression Sleeves0.00//cdn.shopify.com/s/files/1/1405/6268/products/image_66081cb9-2e95-4dc6-9ae6-c3cdefb9fd8f.jpg?v=1648457647//cdn.shopify.com/s/files/1/1405/6268/products/image_66081cb9-2e95-4dc6-9ae6-c3cdefb9fd8f_large.jpg?v=1648457647USDOutOfStockCompression SleevePlastic Pipes & Fittings3 Pack, 3/8", Derlin Compression Sleeves, For 3/8" Outer Diameter Flexible Polybutylene Supply Tube, Plastic, Lead Free Compliant Product Which Meets California AB-1953 & Vermont SB-152 Legislation Certification, Carded.
Compliant Product Which Meets California AB-1953
Compliant Product Which Meets Vermont SB-152
Three Piece Construction - Nut, Sleeve (Or Ferrule) And Body
Use With Copper, Aluminum Or Plastic Tubing (Plastic requires 60P Sleeve And 61P Insert)
Negavtive 65 Degreees to Plus 250 Degrees F. Temperature Range
Standard Fittings Use Short Nuts. Long Nuts Are Available For Higher Vibrations Applications.
To Buy Compressions Fittings with Long Nut, Please Add a "1" In Front Of The Part Number. (i.e. 68 = 168)
Easy To Disassemble, No Flaring Tool Required
Primary Uses: Water, Gasoline, Oil and Vacuum Lines
To Assemble:
1. Cut Smooth, Square End On Tubbing
2. Slide Nut, Then Sleeve Onto Tube. Thread Must Face End.
3. Insert Tube Into Fitting
4. Thread Nut Onto Fitting Until Snug, then as follows: Up To 1/4 Inch = 1-1/4 Turns, 5/16 Inch = 1-3/4 Turns, 3/8 Inch and Up = 2-1/4 Turns
UPC: 719852120483
Manufacturer Part No: 10560-06
Compliant Product Which Meets California AB-1953
Compliant Product Which Meets Vermont SB-152
Three Piece Construction - Nut, Sleeve (Or Ferrule) And Body
Use With Copper, Aluminum Or Plastic Tubing (Plastic requires 60P Sleeve And 61P Insert)
Negavtive 65 Degreees to Plus 250 Degrees F. Temperature Range
Standard Fittings Use Short Nuts. Long Nuts Are Available For Higher Vibrations Applications.
To Buy Compressions Fittings with Long Nut, Please Add a "1" In Front Of The Part Number. (i.e. 68 = 168)
Easy To Disassemble, No Flaring Tool Required
Primary Uses: Water, Gasoline, Oil and Vacuum Lines
To Assemble:
1. Cut Smooth, Square End On Tubbing
2. Slide Nut, Then Sleeve Onto Tube. Thread Must Face End.
3. Insert Tube Into Fitting
4. Thread Nut Onto Fitting Until Snug, then as follows: Up To 1/4 Inch = 1-1/4 Turns, 5/16 Inch = 1-3/4 Turns, 3/8 Inch and Up = 2-1/4 Turns
California residents see
Prop 65 WARNINGS
This product can expose you to petroleum, a chemical known to the State of California to cause cancer and reproductive harm. www.P65Warnings.ca.gov
Anderson Metals Corpadd-to-cart39837087432755Default Title0.00//cdn.shopify.com/s/files/1/1405/6268/products/image_66081cb9-2e95-4dc6-9ae6-c3cdefb9fd8f.jpg?v=1648457647https://www.maxwarehouse.com/products/3-pack-3-8-in-derlin-compression-sleeves?variant=39837087432755OutOfStockDefault Title