Insl-X Swimming Pool Paint Rubber Based Indoor, Outdoor Satin Ocean Blue 1 Gl 24 Hr Pack of 2
More from Insl-X
Rubber Based Swimming Pool Paint provides a durable low-sheen finish for use in residential and commercial concrete pools. It delivers excellent chemical and abrasion resistance and is suitable for use in fresh or salt water. Also acceptable for use in chlorinated pools. Use Rubber Based Swimming Pool Paint over previous chlorinated rubber paint or synthetic rubber-based pool paint or other masonry surfaces in good condition.
Chat
Email Us- UPC: 090548219101
- Manufacturer Part No: RP2723092-01
- 1 Gallon
- Ocean Blue
- INSL-X SWIMMING POOL PAINT
- Indoor or outdoor
- Rubber based pool paint fully compliant with Ozone Transport Commission regulations
- Concrete pools (new or existing)
- Recoats most existing pool paints
- For fresh and salt water
- Satin finish
- Apply when temperatures are between 50 deg. F and 100 degree F.
- Resists fading, fungus, algae, abrasion and alkalis
- No primer required
- Coverage approx. 400 to 500 sq. ft.
- Recoat in 24 hours
- Dry time at 77 deg. F: tack free 30 minutes
- Fill pool only after 7-10 days of dry weather (14 days for indoor pools
- Avoid painting in direct sunlight
- Clean up with xylene
- VOC compliant formula for Ace no. 1003813
- WARNING: This product can expose you to chemicals including Carbon Black, Styrrene, Formaldehyde or more chemicals known to cause cancer, name of one or more chemicals known to cause reproductive toxicity, or name of one or more chemicals known to
- cause both cancer and birth defects or other reproductive harm, which are known to the State of California to cause cancer or birth defects or other reproductive harm. For more information go to Proposition 65 Warnings Website.
Product Details
- UPC: 090548219101
- Manufacturer Part No: RP2723092-01
- 1 Gallon
- Ocean Blue
- INSL-X SWIMMING POOL PAINT
- Indoor or outdoor
- Rubber based pool paint fully compliant with Ozone Transport Commission regulations
- Concrete pools (new or existing)
- Recoats most existing pool paints
- For fresh and salt water
- Satin finish
- Apply when temperatures are between 50 deg. F and 100 degree F.
- Resists fading, fungus, algae, abrasion and alkalis
- No primer required
- Coverage approx. 400 to 500 sq. ft.
- Recoat in 24 hours
- Dry time at 77 deg. F: tack free 30 minutes
- Fill pool only after 7-10 days of dry weather (14 days for indoor pools
- Avoid painting in direct sunlight
- Clean up with xylene
- VOC compliant formula for Ace no. 1003813
- WARNING: This product can expose you to chemicals including Carbon Black, Styrrene, Formaldehyde or more chemicals known to cause cancer, name of one or more chemicals known to cause reproductive toxicity, or name of one or more chemicals known to
- cause both cancer and birth defects or other reproductive harm, which are known to the State of California to cause cancer or birth defects or other reproductive harm. For more information go to Proposition 65 Warnings Website.
