Bayco Light Bulb Changer For Flood Light Bulbs
Description:
This Light Bulb Changer Head fits Floodlight bulbs not installed inside of a recessed can type light fixture. The Floodlight head has soft nylon grippers and a spring finger design ensuring a secure fit around the bulb. It is designed to be used on any floodlight bulb that is not installed inside of a recessed can type light fixture. This head fits the industry standard thread pattern found on 16 and 11 3-section aluminum poles as well as 11 3-section steel pole.
Bayco Light Bulb Changer For Recessed and Track Light Bulbs
Description:
This Light Bulb Changer Head fits Recessed and Track Lighting bulbs. The Recessed and Track Lighting Bulb head is a suction cup design that attaches easily and securely to any smooth surface floodlight sized bulb and includes a string used to release the suction cup from the bulb. This head can be used on any smooth surface floodlight, but is specifically designed to remove a burned out bulb from inside of a recessed can type lighting fixture. This head fits the industry standard thread pattern found on 16 and 11 3-section aluminum poles as well as 11 3-section steel pole.
Wiremike Measurng Device
Description:
The wire mike wire identification and measuring tool is an instrument designed for measuring ACSR, stranded and solid conductors. Made from strong durable, long lasting, high quality stainless steel.
Bayco Light Bulb Changer For Incandescent Bulbs
Description:
This light bulb changer head fits standard incandescent or compact fluorescent bulbs. It has soft nylon grippers and a spring finger design ensuring a secure fit around the bulb. It fits the industry standard thread pattern found on our 16 and 11 3-section aluminum poles as well as our 11 3-section steel pole.
Gardner Bender Alligator Clips
Description:
Replacement leads for Gardner Bender meters.
CIRCUIT BREAKER LOCATOR
Description:
Circuit breaker locator
Lacrosse Technology 911-114 Portable Battery Tester
Gardner Bender 1.5V to 22.5V Analog Battery Tester
Description:
This tester couldn't be better. In just seconds you'll know if that battery you found in the junk drawer, basement or garage still has a charge or needs to be tossed. No outside power source needed simply touch either the positive or negative side of battery to the corresponding contact point on the tester face and then touch the correct test lead to opposite side of battery. The scale indicates a weak battery when the needle drops with an easy-to-read selector switch and color coded good/replace indicator. Extra-features include positive and negative contact posts on the front of the tester making 9 volt battery checks quick and easy and a button cell retainer with press-down test button that holds the cell in place while testing. Because this unit measures the Voltage by applying an appropriate load, rather than just testing the open cell Voltage you get a more accurate result.
Bayco Light Bulb Changer For Broken Bulbs
Description:
This light bulb changer head makes it possible to safely extract a broken bulb from an unpowered socket. This is a 2-piece design allowing for a multitude of different size bulbs to be extracted. This head fits the industry standard thread pattern found on our 16 and 11 3-section aluminum poles as well as our 11 3-section steel pole.
GB Gardner Bender MPS-2125 1/2 Black Cable Boss™ Cable Staples
Sperry 50/1000 VAC Voltage Detector
Description:
A non-contact voltage tester serves as a key component in any electrical toolkit, allowing the user to verify the presence of AC voltage prior to working on an electrical installation or during troubleshooting without requiring physical contact with live electrical conductors. Engineered to specifications required by professional electricians the Sperry Instruments VD3504 Non-Contact voltage Detector features both audible beeping and visual 360 degree flashing red light indicators to alert the user of the presence of AC voltage from 50 volt to 1000 volt. The fully insulated probe tip eliminates the risk of contacting live electrical wires while the patented battery check feature designed into the unit ensures tester and batteries are operating properly, virtually eliminating false negative readings. This unit features 250 lbs. crush-rated impact resistant ABS housing with a protective rubber over mold to withstand tough applications while the soft-grip contoured design ensures a positive user experience over long hours of repeated use. Applications include quickly locating hot terminals in receptacles, pinpointing breaks in wires and detecting the absence/presence of voltage at outlets, circuit breaker panels, light fixtures, switches and motors. The unit includes a pocket-clip for secure portability. Tester is C/ETL/UL Listed, CE Certified, CAT III 1000 volt/IV 600 volt rated. Operates from a single AAA battery. Frequency 50-60 Hz.
Klein Tools LED Receptacle Tester 1 pk
Description:
Klein Tools receptacle tester detects the most common wiring problems in standard receptacles. Conditions indicated wiring correct, open ground, reverse polarity, open hot, open neutral, hot/ground reversed. Conditions not indicated quality of ground, multiple hot wires and combinations of defects, reversal of grounded and grounding conductors.
Gardner Bender 50/600 VAC Voltage Detector
Description:
A non-contact voltage tester serves as a key component in any electrical toolkit, allowing the user to verify the presence of AC voltage prior to working on an electrical installation or during troubleshooting without requiring physical contact with live electrical conductors. The Gardner Bender GVD-3504 Circuit Alert non-contact voltage tester features both audible beeping and visual 360 degree flashing red light indicators to alert the user of the presence of AC voltage from 50 volt to 600 volt. Use to locate breaks in wires and voltage at outlets, circuit breaker panels, light fixtures, switches and motors. Quickly locates the hot terminals in receptacles. Fully insulated probe tip eliminates the risk of contacting live electrical wires. Built in patented safe test feature ensures tester and batteries are working properly. Requires one (1) AAA Battery. Tester is C/ETL/UL Listed, offers a 150 lbs. crush rating, CAT III 600 volt rating.
Gardner Bender 110-125 VAC LED Outlet and GFCI Tester
Description:
Tests ground fault receptacles by overloading circuit and tripping GFCI. Tests for ground fault interruption, open ground, open neutral, open hot, hot or ground reverse, hot or neutral reverse and correct wiring.
15
1 – 15 products of 456
}
