Reliance Natural Gas Pilot Assembly
Description:
Pilot assembly for natural gas water heater, assembly kit works on the following model number 630YOMT, 630YORS, 630YORSD, 630YORT, 640YORTD, 640YOCT, HRN4940S, HRN4940T and HRN4950T. Temperature setting is 190 degree Fahrenheit.
Reliance Natural Gas Pilot Assembly
Description:
Pilot assembly for natural gas water heater, assembly kit works on the following model number 640YOMT, 640YORT4 and 650YOCT. Temperature setting is 180 degree Fahrenheit.
Insinkerator HWT-F1000S 2/3 Gal Stainless Steel Hot Water Tank & Filtration System
Homewerks Worlwide 24 in. Copper Water Heater Supply Line
Description:
Constructed of seamless copper tubing. Featuring an integrated dielectric sleeve, the sleeve isolates dissimilar metals within the waterway, where galvanic and electrolytic corrosion have their greatest potential. This separation provides complete protection against galvanic corrosion that can deteriorate the connector and cause leaks. In addition, the integrated dielectric sleeve eliminates the need to install an additional dielectric union, reducing time and installation costs.
Omnifilter Rs2-Ds12-05 String Wound Sediment Cartridge 2 Pack
Description:
Omnifilter water filter cartridges are designed to filter out all sediment and provide you with clean, pure water. Features string wound construction that increases the efficiency and effectiveness of the filtration process. Works great with both city and well water.
Frost King 48 in. Water Heater Insulation 75 in. L
Description:
Vinyl Backed fiberglass insulation blankets are designed for gas, oil or electric water heaters up to 60 gallon size. It contains a roll of plastic tape.
Reliance PEX Electric or Gas Discharge Pipe 56-1/2 in. H 3/4 in.
Description:
T&P valve discharge pipe. 3/4 inch MIP nipple fused to PEX polymer pipe. Required for installation on T&P relief valve to allow discharge water to drain pan or floor drain
Reliance Aluminum Gas or Electric Anode Rod 29 in. H
Description:
29 inch Aluminum anode rod protect the tank from corrosion to extend tank life. Flush tank and replace the anode rod every year. Fits all heaters and can be cut to fit shorter tanks rod.
Plumb Craft Waxman 7305500LF 3/4 X 18 Lead Free Water Heater Connector
Description:
Plumb Craft Waxman Water Heater Connectors are designed with flexible copper tubing for easy installation in hard-to-reach places. This high quality water heater connector features brass fittings, insulated washers, and low lead. Measures 18 inches in length and 3/4 inch in diameter.
Farm Innovators C-500 500 Watt Submergible De-Icer
Farm Innovators H-419 Submersible Water Tank Heater
Camco 08163 Upper Thermostat
Camco 07723 Lower Thermostat
Camco 02143 1500 Watt 120 Volt Screw In Element
Reliance Brass Valve Kit
Description:
Tankless Isolation Valve Kit. Used To Isolate A Tankless Water Heater For Service & Are Required In Most Installations, Includes: Two 3/4 Female Thread & One 1/4 Turn Operation Ball Valves, 1 Connects To Cold Water Inlet & 1 Valve Connects To Hot Water Outlet, Each Valve Includes A Side Inlet Ball Valve With 3/4 Male Hose Thread Connection, Low Lead California Compliant, 600 LB WOG Rating, Non-Shock, Ab1953 Certified.
15
1 – 15 products of 159
}
