This great J-B Weld™ ExtremeHeat™ is formulated to repair iron, steel, and metal in high-temperature environments (2400°F / 1300°C). When fully cured, this metallic compound can be drilled, machined or sanded. This 3-ounce product is water-based, non-flammable and contains no solvents or Volatile Organic Compounds (VOCs). It is exceptional for repairing cracks, small gaps, seam connections or holes in exhaust manifolds, pipe connections, mufflers, catalytic converters, outdoor grills, fireboxes, gas and commercial furnaces and water heaters.
Heat Exchange Units
Fire Box / Fire Place
Blue Magic quick steel extreme high temperature metal repair withstands temperatures up to 2400 degree Fahrenheit, 1300 degree Celsius, sets in five minutes, steel hard in 15 minutes, full cure in one hour. It can be drilled, tapped, file, machined, sanded and painted. Withstands direct flame, welds holes and cracks in iron and steel.
Seal leaks with shop craft high temperature gasket material by Custom Accessories. Use this gasket material anywhere parts must be sealed to prevent leakage. Can be used on vehicles, tractors and in many other applications. Works well on all applications that require high heat tolerance.
Made for your comfort, this great SteelStick is hand-mixable, steel-reinforced, non-rusting that quickly repairs anything made of metal making it look new and perfect again. Repair even the hardest metal piece very easily, after mixing it forms and industrial strength polymer compound that can be molded into any shape, giving you the ability of repair something is just minutes. Great for automotive and machine parts, exhaust systems, plumbing, stripped threads, rust damage and household repairs, make your life easier without using multiple tools.
Seal leaks with shop craft cork gasket material by custom accessories. Use this gasket material anywhere parts must be sealed to prevent leakage. Can be used on vehicles, tractors and in many other applications. Works well on water outlets, oil pan, timing cover, rear axle housing, fuel pump and more.
The patent-pending gel twist(TM) pin-point applicator puts the Thread locker where you want it. on the part gel formula provides liquid-reliability without drips, globs, mess or waste. All-purpose, medium strength thread locker. Ideal for all nut and bolt applications 1/4 inch to 1 inch (6 mm to 25 mm). Eliminates need for stocking expensive lock nuts and lock washers. Locks and seals while preventing parts from loosening due to vibration. Protects threads from corrosion. Removable with hand tools for easy disassembly.
J-b Marine weld is a specially formulated two part Cold-weld adhesive system that provides strong, lasting repairs for bonding different or similar surfaces, such as metal, composites, fiberglass and others. Marine weld sets in 20 minutes at room temperature. At full cure, its color is white. It may then be shaped, tapped, filed, sanded and drilled, retaining full strength above or below the water's surface. Marine weld has a 1:1 mixing ratio and tensile strength of 3200 PSI.
J-B Weld is the original cold weld two-part epoxy system that provides strong, lasting repairs to metal and multiple surfaces. Mixed at a ratio of 1:1, it forms a permanent bond and can be shaped, tapped, filed, sanded and drilled after curing. At room temperature, J-B weld sets in 4-6 hours to a dark grey color. A full cure is reached in 15-24 hours. J-B weld has a tensile strength of 3960 lbs. per square inch and sets to a hard bond overnight. It can withstand temperatures up to 550 degree Fahrenheit when fully cured.
D-L pulling winches are best suited for boat trailer and other horizontal pulling applications which require the freewheeling feature of ratchet type winches. This unit has a1400 lb. capacity with a reversible ratchet to allow cranking cable or strap onto the drum in either direction.