SharkBite Push to Connect 1/2 in. Push x 1/2 in. Dia. FIP Brass 90 Degree Drop Ear Elbow

SharkBite  Push to Connect 1/2 in. Push   x 1/2 in. Dia. FIP  Brass  90 Degree Drop Ear Elbow

SharkBite Push to Connect 1/2 in. Push x 1/2 in. Dia. FIP Brass 90 Degree Drop Ear Elbow

More from: SharkBite

Retail: $9.49
$801 (16% Off)

Drop Ear Elbows are used to transition from Copper, PEX, CPVC or PE-RT to threaded pipe such as shower arms or tub spouts. They are similar to female elbows, but have mounting ears with holes for securing to a surface such as a stud or wall and they provide additional stability. SharkBite drop ear elbows are compatible with copper, CPVC and PEX pipe and do not require any soldering, clamps, unions or glue. Their stainless steel teeth bite down and grip the pipe for a strong, dependable connection and their specially formulated O-ring compresses to create a perfect watertight seal.
- +
In Stock
250+ Units
Need more?

Call Us: 1 800-210-0132

Chat with Us: Chat

Drop Ear Elbows are used to transition from Copper, PEX, CPVC or PE-RT to threaded pipe such as shower arms or tub spouts. They are similar to female elbows, but have mounting ears with holes for securing to a surface such as a stud or wall and they provide additional stability. SharkBite drop ear elbows are compatible with copper, CPVC and PEX pipe and do not require any soldering, clamps, unions or glue. Their stainless steel teeth bite down and grip the pipe for a strong, dependable connection and their specially formulated O-ring compresses to create a perfect watertight seal.
  • UPC: 697285465930
  • Manufacturer Part No:
  • Certified for potable water and hydronic applications
  • Approved by NSF/ANSI 372-2010
  • Exceeds ASSE 1061 Section 1V, 4.1 Materials - Dezincification (DZR) - ISO 6509
  • All fittings are made of Lead Free DZR Brass
  • Certified for underground and behind the wall applications and as a manufactured joint without access panels
  • Connects copper, PEX, or CPVC in any combination
  • Corrosion resistant
  • The Sharkbite Push-Fit Connection System is the best option for connecting PEX tubing in water distribution systems when lower material cost is desired. Robustly constructed with lead.
  • Always consult with local plumbing codes concerning specific applications
  • Certified to 200 psi and 200°F
  • 90° angle
  • 1/2 X 1/2 FNPT
  • Approved for burial
  • Traceability - All products are stamped with a manufacturing date
  • No soldering, unions or glue needed
  • All components are chloramine resistant
  • Free DZR brass, the SharkBite Barb fittings are corrosion resistant. Use for new installation and repair of potable water distribution systems. Fittings should be wrapped with an impervious material, chloride-free tape or tightly wrapped and sealed insulation works well to prevent direct contact with the backfill. Backfill should be free of rocks, debris or any sharp objects that may cause damage through impact or abrasion.
  • California residents see
    Prop 65 WARNINGS
    This product can expose you to chemicals including Lead and Lead Compounds, which are known to the state of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

Product Details

  • UPC: 697285465930
  • Manufacturer Part No:
  • Certified for potable water and hydronic applications
  • Approved by NSF/ANSI 372-2010
  • Exceeds ASSE 1061 Section 1V, 4.1 Materials - Dezincification (DZR) - ISO 6509
  • All fittings are made of Lead Free DZR Brass
  • Certified for underground and behind the wall applications and as a manufactured joint without access panels
  • Connects copper, PEX, or CPVC in any combination
  • Corrosion resistant
  • The Sharkbite Push-Fit Connection System is the best option for connecting PEX tubing in water distribution systems when lower material cost is desired. Robustly constructed with lead.
  • Always consult with local plumbing codes concerning specific applications
  • Certified to 200 psi and 200°F
  • 90° angle
  • 1/2 X 1/2 FNPT
  • Approved for burial
  • Traceability - All products are stamped with a manufacturing date
  • No soldering, unions or glue needed
  • All components are chloramine resistant
  • Free DZR brass, the SharkBite Barb fittings are corrosion resistant. Use for new installation and repair of potable water distribution systems. Fittings should be wrapped with an impervious material, chloride-free tape or tightly wrapped and sealed insulation works well to prevent direct contact with the backfill. Backfill should be free of rocks, debris or any sharp objects that may cause damage through impact or abrasion.
  • California residents see
    Prop 65 WARNINGS
    This product can expose you to chemicals including Lead and Lead Compounds, which are known to the state of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.