SharkBite 3/4 in. Push x 1/2 in. Dia. Push Brass Reducing Elbow

SharkBite  3/4 in. Push   x 1/2 in. Dia. Push  Brass  Reducing Elbow

SharkBite 3/4 in. Push x 1/2 in. Dia. Push Brass Reducing Elbow

More from: SharkBite

Retail: $13.99
$931 (33% Off)

When transitioning pipe size, there is no easier way than with SharkBites push-fit reducing couplings. Easily reduce from 1 inch to 3/4 inch or 3/4 inch to 1/2 inch all the way down to 1/4 inch sizes. There is no need for solder, glue, clamps or unions, simply push-to-connect and move on. This quick connect fitting is designed for potable water and radiant heating applications with no access panels required. It is also rated to 200 degree Fahrenheit and 200 PSI.
- +
In Stock
250+ Units
Need more?

Call Us: 1 800-210-0132

Chat with Us: Chat

When transitioning pipe size, there is no easier way than with SharkBites push-fit reducing couplings. Easily reduce from 1 inch to 3/4 inch or 3/4 inch to 1/2 inch all the way down to 1/4 inch sizes. There is no need for solder, glue, clamps or unions, simply push-to-connect and move on. This quick connect fitting is designed for potable water and radiant heating applications with no access panels required. It is also rated to 200 degree Fahrenheit and 200 PSI.
  • UPC: 697285465862
  • Manufacturer Part No:
  • Certified for potable water and hydronic applications
  • Exceeds ASSE 1061 Section 1V, 4.1 Materials - Dezincification (DZR) - ISO 6509
  • Approved by NSF/ANSI 372-2010
  • All fittings are made of Lead Free DZR Brass
  • Free DZR brass, the SharkBite Barb fittings are corrosion resistant. Use for new installation and repair of potable water distribution systems. Fittings should be wrapped with an impervious material, chloride-free tape or tightly wrapped and sealed insulation works well to prevent direct contact with the backfill. Backfill should be free of rocks, debris or any sharp objects that may cause damage through impact or abrasion.
  • All components are chloramine resistant
  • No soldering, unions or glue needed
  • Traceability - All products are stamped with a manufacturing date
  • Approved for burial
  • 3/4 X 1/2
  • 90° angle
  • Certified to 200 psi and 200°F
  • Always consult with local plumbing codes concerning specific applications
  • The Sharkbite Push-Fit Connection System is the best option for connecting PEX tubing in water distribution systems when lower material cost is desired. Robustly constructed with lead.
  • Corrosion resistant
  • Connects copper, PEX, or CPVC in any combination
  • Certified for underground and behind the wall applications and as a manufactured joint without access panels
  • California residents see
    Prop 65 WARNINGS
    This product can expose you to chemicals including Lead and Lead Compounds, which are known to the state of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

Product Details

  • UPC: 697285465862
  • Manufacturer Part No:
  • Certified for potable water and hydronic applications
  • Exceeds ASSE 1061 Section 1V, 4.1 Materials - Dezincification (DZR) - ISO 6509
  • Approved by NSF/ANSI 372-2010
  • All fittings are made of Lead Free DZR Brass
  • Free DZR brass, the SharkBite Barb fittings are corrosion resistant. Use for new installation and repair of potable water distribution systems. Fittings should be wrapped with an impervious material, chloride-free tape or tightly wrapped and sealed insulation works well to prevent direct contact with the backfill. Backfill should be free of rocks, debris or any sharp objects that may cause damage through impact or abrasion.
  • All components are chloramine resistant
  • No soldering, unions or glue needed
  • Traceability - All products are stamped with a manufacturing date
  • Approved for burial
  • 3/4 X 1/2
  • 90° angle
  • Certified to 200 psi and 200°F
  • Always consult with local plumbing codes concerning specific applications
  • The Sharkbite Push-Fit Connection System is the best option for connecting PEX tubing in water distribution systems when lower material cost is desired. Robustly constructed with lead.
  • Corrosion resistant
  • Connects copper, PEX, or CPVC in any combination
  • Certified for underground and behind the wall applications and as a manufactured joint without access panels
  • California residents see
    Prop 65 WARNINGS
    This product can expose you to chemicals including Lead and Lead Compounds, which are known to the state of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.