Sharkbite Straight Connector < 0.25 % Lead 1/2 " X 1/2 " Mnpt Bagged

Sharkbite Straight Connector < 0.25 % Lead 1/2 " X 1/2 " Mnpt Bagged

More from: Sharkbite
SharkBite Male Connectors combine innovative push-to-connect design with a standard MNPT adapter on the opposite end. The push-fit end is compatible with copper, PEX, CPVC, PE-RT or SRD9 HDPE pipes and can be installed with no solder, glue, unions or tools required. This fitting is designed for potable water and radiant heating applications with no access panels required. It is rated up to 200 degree Fahrenheit and 200 PSI.

$5.93 Was: $6.80

- +
In Stock
250+ Units
Need more?

Call Us: 1 800-210-0132

Chat with Us: Chat

FREE Shipping on all orders over $49* view details

YOU ARE ELIGIBLE FOR FREE SHIPPING IF:


  • Your order is $49 or more after all coupons and discounts are applied.
  • Your order doesn't weight over 10 pounds. Orders overweight will have a surcharge per pound for every pound over 10 pounds.
Customer Support:

ChatChat

Email Us Email Us

Tel: +1- 800 - 210 - 0132

  • UPC: 697285465763
  • Manufacturer Part No:
  • Connects PEX pipe
  • Certified for underground and behind the wall applications and as a manufactured joint without access panels
  • Certified to 200 psi and 200°F
  • Exceeds ASSE 1061 Section 1V, 4.1 Materials - Dezincification (DZR) - ISO 6509
  • Always consult with local plumbing codes concerning specific applications
  • Certified for potable water and hydronic applications
  • Traceability - All products are stamped with a manufacturing date
  • All components are chloramine resistant
  • Approved for burial
  • Corrosion resistant
  • All fittings are made of Lead Free DZR Brass
  • The SharkBite PEX/Barb Connection System is the best option for connecting PEX tubing in water distribution systems when lower material cost is desired. Robustly constructed with lead
  • 1/2" X 1/2" MNPT straight
  • Free DZR brass, the SharkBite Barb fittings are corrosion resistant. Use for new installation and repair of potable water distribution systems. Fittings should be wrapped with an impervious material, chloride-free tape or tightly wrapped and sealed insulation works well to prevent direct contact with the backfill. Backfill should be free of rocks, debris or any sharp objects that may cause damage through impact or abrasion.
  • Certified to 200 psi and 200F
  • The Sharkbite Push-Fit Connection System is the best option for connecting PEX tubing in water distribution systems when lower material cost is desired. Robustly constructed with lead.
  • California residents see
    Prop 65 WARNINGS
    This product can expose you to chemicals including Lead and Lead Compounds, which are known to the state of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

Product Details

  • UPC: 697285465763
  • Manufacturer Part No:
  • Connects PEX pipe
  • Certified for underground and behind the wall applications and as a manufactured joint without access panels
  • Certified to 200 psi and 200°F
  • Exceeds ASSE 1061 Section 1V, 4.1 Materials - Dezincification (DZR) - ISO 6509
  • Always consult with local plumbing codes concerning specific applications
  • Certified for potable water and hydronic applications
  • Traceability - All products are stamped with a manufacturing date
  • All components are chloramine resistant
  • Approved for burial
  • Corrosion resistant
  • All fittings are made of Lead Free DZR Brass
  • The SharkBite PEX/Barb Connection System is the best option for connecting PEX tubing in water distribution systems when lower material cost is desired. Robustly constructed with lead
  • 1/2" X 1/2" MNPT straight
  • Free DZR brass, the SharkBite Barb fittings are corrosion resistant. Use for new installation and repair of potable water distribution systems. Fittings should be wrapped with an impervious material, chloride-free tape or tightly wrapped and sealed insulation works well to prevent direct contact with the backfill. Backfill should be free of rocks, debris or any sharp objects that may cause damage through impact or abrasion.
  • Certified to 200 psi and 200F
  • The Sharkbite Push-Fit Connection System is the best option for connecting PEX tubing in water distribution systems when lower material cost is desired. Robustly constructed with lead.
  • California residents see
    Prop 65 WARNINGS
    This product can expose you to chemicals including Lead and Lead Compounds, which are known to the state of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.