Sharkbite 90 Degree Elbow < 0.25 % Lead 1/2 " X 1/2 " Bagged

Sharkbite 90 Degree Elbow < 0.25 % Lead 1/2 " X 1/2 " Bagged

More from: Sharkbite
SharkBite Elbows allow the user to connect any combination of copper, PEX CPVC or PE-RT pipe together to form a 90 degree connection. With no soldering, clamps, unions or glue required, its as simple as inserting the pipe into the fitting deep enough to be sealed by the specially-formulated O-ring. Once inserted, the stainless steel teeth bite down and grip the pipe. This push-to-connect fitting is designed for potable water and radiant heating applications with no access panels required. It is rated up to 200 degree Fahrenheit and 200 PSI.

$7.34 Was: $8.74

- +
In Stock
250+ Units
Need more?

Call Us: 1 800-210-0132

Chat with Us: Chat

FREE Shipping on all orders over $49* view details

YOU ARE ELIGIBLE FOR FREE SHIPPING IF:


  • Your order is $49 or more after all coupons and discounts are applied.
  • Your order doesn't weight over 10 pounds. Orders overweight will have a surcharge per pound for every pound over 10 pounds.
  • Your order doesn't have any measurement restrictions may occur. You'll find additional information about measurement restrictions in our Shipping section.
Customer Support:

ChatChat

Email Us Email Us

Tel: +1- 800 - 210 - 0132

  • UPC: 697285465824
  • Manufacturer Part No:
  • Certified for underground and behind the wall applications and as a manufactured joint without access panels
  • Certified for potable water and hydronic applications
  • Exceeds ASSE 1061 Section 1V, 4.1 Materials - Dezincification (DZR) - ISO 6509
  • Certified to 200 psi and 200°F
  • Traceability - All products are stamped with a manufacturing date
  • Always consult with local plumbing codes concerning specific applications
  • Approved for burial
  • All components are chloramine resistant
  • Connects copper, PEX, or CPVC in any combination
  • Corrosion resistant
  • All fittings are made of lead free DZR Brass
  • Approved by NSF/ANSI 372-2010
  • 1/2" X 1/2"
  • 90° angle
  • No soldering, unions or glue needed
  • Certified to 200 psi and 200F
  • Free DZR brass, the SharkBite Barb fittings are corrosion resistant. Use for new installation and repair of potable water distribution systems. Fittings should be wrapped with an impervious material, chloride-free tape or tightly wrapped and sealed insulation works well to prevent direct contact with the backfill. Backfill should be free of rocks, debris or any sharp objects that may cause damage through impact or abrasion.
  • The Sharkbite Push-Fit Connection System is the best option for connecting PEX tubing in water distribution systems when lower material cost is desired. Robustly constructed with lead.
  • 90 angle

Product Details

  • UPC: 697285465824
  • Manufacturer Part No:
  • Certified for underground and behind the wall applications and as a manufactured joint without access panels
  • Certified for potable water and hydronic applications
  • Exceeds ASSE 1061 Section 1V, 4.1 Materials - Dezincification (DZR) - ISO 6509
  • Certified to 200 psi and 200°F
  • Traceability - All products are stamped with a manufacturing date
  • Always consult with local plumbing codes concerning specific applications
  • Approved for burial
  • All components are chloramine resistant
  • Connects copper, PEX, or CPVC in any combination
  • Corrosion resistant
  • All fittings are made of lead free DZR Brass
  • Approved by NSF/ANSI 372-2010
  • 1/2" X 1/2"
  • 90° angle
  • No soldering, unions or glue needed
  • Certified to 200 psi and 200F
  • Free DZR brass, the SharkBite Barb fittings are corrosion resistant. Use for new installation and repair of potable water distribution systems. Fittings should be wrapped with an impervious material, chloride-free tape or tightly wrapped and sealed insulation works well to prevent direct contact with the backfill. Backfill should be free of rocks, debris or any sharp objects that may cause damage through impact or abrasion.
  • The Sharkbite Push-Fit Connection System is the best option for connecting PEX tubing in water distribution systems when lower material cost is desired. Robustly constructed with lead.
  • 90 angle