SharkBite 1 in. Push Brass End Stop

SharkBite  1 in. Push   Brass  End Stop

SharkBite 1 in. Push Brass End Stop

More from: SharkBite

Retail: $16.99
$1391 (18% Off)

SharkBite End Caps are push-to-connect and are the easiest way to cap off your Copper, PEX, CPVC or PE-RT pipe lines. There is no soldering, clamps, unions or glue required. These fittings are great for stub outs and pressure testing a home as they take no time to cure. They are easily removed with a Disconnect Clip. All SharkBite fittings are capable of being installed on either wet or dry pipe. This product is rated for up to 200 PSI and 200 degree Fahrenheit.
- +
In Stock
78 Units
Need more?

Call Us: 1 800-210-0132

Chat with Us: Chat

SharkBite End Caps are push-to-connect and are the easiest way to cap off your Copper, PEX, CPVC or PE-RT pipe lines. There is no soldering, clamps, unions or glue required. These fittings are great for stub outs and pressure testing a home as they take no time to cure. They are easily removed with a Disconnect Clip. All SharkBite fittings are capable of being installed on either wet or dry pipe. This product is rated for up to 200 PSI and 200 degree Fahrenheit.
  • UPC: 697285466098
  • Manufacturer Part No:
  • Certified for potable water and hydronic applications
  • Approved by NSF/ANSI 372-2010
  • Exceeds ASSE 1061 Section 1V, 4.1 Materials - Dezincification (DZR) - ISO 6509
  • All fittings are made of Lead Free DZR Brass
  • Certified for underground and behind the wall applications and as a manufactured joint without access panels
  • Connects copper, PEX, or CPVC in any combination
  • Corrosion resistant
  • Free DZR brass, the SharkBite Barb fittings are corrosion resistant. Use for new installation and repair of potable water distribution systems. Fittings should be wrapped with an impervious material, chloride-free tape or tightly wrapped and sealed insulation works well to prevent direct contact with the backfill. Backfill should be free of rocks, debris or any sharp objects that may cause damage through impact or abrasion.
  • Always consult with local plumbing codes concerning specific applications
  • Certified to 200 psi and 200°F
  • 1
  • The SharkBite Push-Fit Connection System is the best option for connecting PEX tubing in water distribution systems when lower material cost is desired. Robustly constructed with lead.
  • Approved for burial
  • Traceability - All products are stamped with a manufacturing date
  • No soldering, unions or glue needed
  • All components are chloramine resistant
  • California residents see
    Prop 65 WARNINGS
    This product can expose you to chemicals including Lead and Lead Compounds, which are known to the state of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

Product Details

  • UPC: 697285466098
  • Manufacturer Part No:
  • Certified for potable water and hydronic applications
  • Approved by NSF/ANSI 372-2010
  • Exceeds ASSE 1061 Section 1V, 4.1 Materials - Dezincification (DZR) - ISO 6509
  • All fittings are made of Lead Free DZR Brass
  • Certified for underground and behind the wall applications and as a manufactured joint without access panels
  • Connects copper, PEX, or CPVC in any combination
  • Corrosion resistant
  • Free DZR brass, the SharkBite Barb fittings are corrosion resistant. Use for new installation and repair of potable water distribution systems. Fittings should be wrapped with an impervious material, chloride-free tape or tightly wrapped and sealed insulation works well to prevent direct contact with the backfill. Backfill should be free of rocks, debris or any sharp objects that may cause damage through impact or abrasion.
  • Always consult with local plumbing codes concerning specific applications
  • Certified to 200 psi and 200°F
  • 1
  • The SharkBite Push-Fit Connection System is the best option for connecting PEX tubing in water distribution systems when lower material cost is desired. Robustly constructed with lead.
  • Approved for burial
  • Traceability - All products are stamped with a manufacturing date
  • No soldering, unions or glue needed
  • All components are chloramine resistant
  • California residents see
    Prop 65 WARNINGS
    This product can expose you to chemicals including Lead and Lead Compounds, which are known to the state of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.