SharkBite 3/8 in. Push Brass End Stop
More from: SharkBite
Type: Brass Cts Push Fittings
$667
Retail: $9.49
SharkBite End Caps are push-to-connect and are the easiest way to cap off your Copper, PEX, CPVC or PE-RT pipe lines. There is no soldering, clamps, unions or glue required. These fittings are great for stub outs and pressure testing a home as they take no time to cure. They are easily removed with a Disconnect Clip. All SharkBite fittings are capable of being installed on either wet or dry pipe. This product is rated for up to 200 PSI and 200 degree Fahrenheit.
SharkBite End Caps are push-to-connect and are the easiest way to cap off your Copper, PEX, CPVC or PE-RT pipe lines. There is no soldering, clamps, unions or glue required. These fittings are great for stub outs and pressure testing a home as they take no time to cure. They are easily removed with a Disconnect Clip. All SharkBite fittings are capable of being installed on either wet or dry pipe. This product is rated for up to 200 PSI and 200 degree Fahrenheit.
- UPC: 697285466067
- Manufacturer Part No:
- All components are chloramine resistant
- 3/8 (1/2 OD)
- Exceeds ASSE 1061 Section 1V, 4.1 Materials - Dezincification (DZR) - ISO 6509
- The SharkBite Push-Fit Connection System is the best option for connecting PEX tubing in water distribution systems when lower material cost is desired. Robustly constructed with lead.
- Certified for underground and behind the wall applications and as a manufactured joint without access panels
- Certified to 200 psi and 200°F
- Connects copper, PEX and CPVC pipe in any combination
- Traceability - All products are stamped with a manufacturing date
- Use for new installation and repair of potable water distribution systems
- Free DZR brass, the SharkBite Barb fittings are corrosion resistant. Use for new installation and repair of potable water distribution systems. Fittings should be wrapped with an impervious material, chloride-free tape or tightly wrapped and sealed insulation works well to prevent direct contact with the backfill. Backfill should be free of rocks, debris or any sharp objects that may cause damage through impact or abrasion.
- No soldering, clamps, unions or glue required
- Corrosion resistant
- Lead free DZR brass construction
- Approved for burial
- California residents see
Prop 65 WARNINGSThis product can expose you to chemicals including Lead and Lead Compounds, which are known to the state of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Product Details
- UPC: 697285466067
- Manufacturer Part No:
- All components are chloramine resistant
- 3/8 (1/2 OD)
- Exceeds ASSE 1061 Section 1V, 4.1 Materials - Dezincification (DZR) - ISO 6509
- The SharkBite Push-Fit Connection System is the best option for connecting PEX tubing in water distribution systems when lower material cost is desired. Robustly constructed with lead.
- Certified for underground and behind the wall applications and as a manufactured joint without access panels
- Certified to 200 psi and 200°F
- Connects copper, PEX and CPVC pipe in any combination
- Traceability - All products are stamped with a manufacturing date
- Use for new installation and repair of potable water distribution systems
- Free DZR brass, the SharkBite Barb fittings are corrosion resistant. Use for new installation and repair of potable water distribution systems. Fittings should be wrapped with an impervious material, chloride-free tape or tightly wrapped and sealed insulation works well to prevent direct contact with the backfill. Backfill should be free of rocks, debris or any sharp objects that may cause damage through impact or abrasion.
- No soldering, clamps, unions or glue required
- Corrosion resistant
- Lead free DZR brass construction
- Approved for burial
- California residents see
Prop 65 WARNINGSThis product can expose you to chemicals including Lead and Lead Compounds, which are known to the state of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
