Sharkbite Reducing Coupling 1/2 " X 3/8 " Bagged

Sharkbite Reducing Coupling 1/2 " X 3/8 " Bagged

More from: Sharkbite
When transitioning pipe size, there is no easier way than with SharkBite push-fit reducing couplings. Easily reduce from 1 inch to 3/4 inch or 3/4 inch to 1/2 inch all the way down to 1/4 inch sizes. There is no need for solder, glue, clamps or unions, simply push-to-connect and move on. This quick connect fitting is designed for potable water and radiant heating applications with no access panels required. It is also rated to 200 degree Fahrenheit and 200 PSI.

$6.93 Was: $8.32

- +
In Stock
250+ Units
Need more?

Call Us: 1 800-210-0132

Chat with Us: Chat

FREE Shipping on all orders over $49* view details

YOU ARE ELIGIBLE FOR FREE SHIPPING IF:


  • Your order is $49 or more after all coupons and discounts are applied.
  • Your order doesn't weight over 20 pounds. Orders overweight will have a surcharge per pound for every pound over 20 pounds.
  • Your order doesn't have any measurement restrictions may occur. You'll find additional information about measurement restrictions in our Shipping section.
Customer Support:

ChatChat

Email Us Email Us

Tel: +1- 800 - 210 - 0132

  • UPC: 697285465633
  • Manufacturer Part No:
  • Connects PEX pipe
  • Certified to 200 psi and 200°F
  • Exceeds ASSE 1061 Section 1V, 4.1 Materials - Dezincification (DZR) - ISO 6509
  • Certified for underground and behind the wall applications and as a manufactured joint without access panels
  • Certified for potable water and hydronic applications
  • Always consult with local plumbing codes concerning specific applications
  • All components are chloramine resistant
  • Traceability - All products are stamped with a manufacturing date
  • All fittings are made of Lead Free DZR Brass
  • Approved for burial
  • Corrosion resistant
  • Lead free brass
  • 3/8" X 1/2"
  • The SharkBite PEX/Barb Connection System is the best option for connecting PEX tubing in water distribution systems when lower material cost is desired. Robustly constructed with lead
  • Free DZR brass, the SharkBite Barb fittings are corrosion resistant. Use for new installation and repair of potable water distribution systems. Fittings should be wrapped with an impervious material, chloride-free tape or tightly wrapped and sealed insulation works well to prevent direct contact with the backfill. Backfill should be free of rocks, debris or any sharp objects that may cause damage through impact or abrasion.
  • Certified to 200 psi and 200F
  • The Sharkbite Push-Fit Connection System is the best option for connecting PEX tubing in water distribution systems when lower material cost is desired. Robustly constructed with lead.

Product Details

  • UPC: 697285465633
  • Manufacturer Part No:
  • Connects PEX pipe
  • Certified to 200 psi and 200°F
  • Exceeds ASSE 1061 Section 1V, 4.1 Materials - Dezincification (DZR) - ISO 6509
  • Certified for underground and behind the wall applications and as a manufactured joint without access panels
  • Certified for potable water and hydronic applications
  • Always consult with local plumbing codes concerning specific applications
  • All components are chloramine resistant
  • Traceability - All products are stamped with a manufacturing date
  • All fittings are made of Lead Free DZR Brass
  • Approved for burial
  • Corrosion resistant
  • Lead free brass
  • 3/8" X 1/2"
  • The SharkBite PEX/Barb Connection System is the best option for connecting PEX tubing in water distribution systems when lower material cost is desired. Robustly constructed with lead
  • Free DZR brass, the SharkBite Barb fittings are corrosion resistant. Use for new installation and repair of potable water distribution systems. Fittings should be wrapped with an impervious material, chloride-free tape or tightly wrapped and sealed insulation works well to prevent direct contact with the backfill. Backfill should be free of rocks, debris or any sharp objects that may cause damage through impact or abrasion.
  • Certified to 200 psi and 200F
  • The Sharkbite Push-Fit Connection System is the best option for connecting PEX tubing in water distribution systems when lower material cost is desired. Robustly constructed with lead.