SharkBite 1/2 PTC x 3/8 Compression Brass Straight Stop Valve

SharkBite 1/2 PTC x 3/8 Compression Brass Straight Stop Valve

More from: SharkBite

Retail: $12.99
$1150 (11% Off)

SharkBite Straight Stops combine push-fit technology with a straight stop quarter turn valve. This allows the valve to control water flow to household plumbing fixtures and provides easy shut-off of water flow for maintenance and repair, if necessary. These valves require no solder, clamps, unions or glue. The push-to-connect end allows you to push on to Copper, PEX, CPVC or PE-RT pipe easily. This product can be easily rotated after assembly for easy installation, even in tight spaces.
- +
In Stock
250+ Units
Need more?

Call Us: 1 800-210-0132

Chat with Us: Chat

SharkBite Straight Stops combine push-fit technology with a straight stop quarter turn valve. This allows the valve to control water flow to household plumbing fixtures and provides easy shut-off of water flow for maintenance and repair, if necessary. These valves require no solder, clamps, unions or glue. The push-to-connect end allows you to push on to Copper, PEX, CPVC or PE-RT pipe easily. This product can be easily rotated after assembly for easy installation, even in tight spaces.
  • UPC: 697285605756
  • Manufacturer Part No:
  • Certified for potable water and hydronic applications
  • Approved by NSF/ANSI 372-2010
  • Quarter turn
  • Exceeds ASSE 1061 Section 1V, 4.1 Materials - Dezincification (DZR) - ISO 6509
  • Certified for underground and behind the wall applications and as a manufactured joint without access panels
  • Connects copper, PEX, or CPVC in any combination
  • Corrosion resistant
  • All fittings are made of Lead Free DZR Brass
  • Always consult with local plumbing codes concerning specific applications
  • Certified to 200 psi and 200°F
  • Full port valve
  • Chrome plated
  • Approved for burial
  • Traceability - All products are stamped with a manufacturing date
  • No soldering, unions or glue needed
  • All components are chloramine resistant
  • The Sharkbite Push-Fit Connection System is the best option for connecting PEX tubing in water distribution systems when lower material cost is desired. Robustly constructed with lead.
  • Free DZR brass, the SharkBite Barb fittings are corrosion resistant. Use for new installation and repair of potable water distribution systems. Fittings should be wrapped with an impervious material, chloride-free tape or tightly wrapped and sealed insulation works well to prevent direct contact with the backfill. Backfill should be free of rocks, debris or any sharp objects that may cause damage through impact or abrasion.
  • 1/2 X 3/8 compression
  • California residents see
    Prop 65 WARNINGS
    This product can expose you to chemicals including lead which is known to the State Of California to cause cancer and defects or other reproductive harm.

Product Details

  • UPC: 697285605756
  • Manufacturer Part No:
  • Certified for potable water and hydronic applications
  • Approved by NSF/ANSI 372-2010
  • Quarter turn
  • Exceeds ASSE 1061 Section 1V, 4.1 Materials - Dezincification (DZR) - ISO 6509
  • Certified for underground and behind the wall applications and as a manufactured joint without access panels
  • Connects copper, PEX, or CPVC in any combination
  • Corrosion resistant
  • All fittings are made of Lead Free DZR Brass
  • Always consult with local plumbing codes concerning specific applications
  • Certified to 200 psi and 200°F
  • Full port valve
  • Chrome plated
  • Approved for burial
  • Traceability - All products are stamped with a manufacturing date
  • No soldering, unions or glue needed
  • All components are chloramine resistant
  • The Sharkbite Push-Fit Connection System is the best option for connecting PEX tubing in water distribution systems when lower material cost is desired. Robustly constructed with lead.
  • Free DZR brass, the SharkBite Barb fittings are corrosion resistant. Use for new installation and repair of potable water distribution systems. Fittings should be wrapped with an impervious material, chloride-free tape or tightly wrapped and sealed insulation works well to prevent direct contact with the backfill. Backfill should be free of rocks, debris or any sharp objects that may cause damage through impact or abrasion.
  • 1/2 X 3/8 compression
  • California residents see
    Prop 65 WARNINGS
    This product can expose you to chemicals including lead which is known to the State Of California to cause cancer and defects or other reproductive harm.