Water Weld Epoxy Putty 2 Oz.

Water Weld Epoxy Putty 2 Oz.

More from: Water Weld
WaterWeld will plug or seal leaks and patch holes and cracks in almost anything. Ideal for repairing plumbing, fuel tanks, tub and shower, drains, pool and spa, boats and potable water tanks setup occurs even under water. After curing, it can be drilled, tapped, filed, sanded and painted. WaterWeld has a set time of 15-25 minutes and sets hard in one hour. WaterWeld cures to an off-white color, is rated at a tensile strength of 900 PSI and will withstand temperatures up to 300 degree Fahrenheit.

$5.04 Was: $6.05

- +
In Stock
250+ Units
Need more?

Call Us: 1 800-210-0132

Chat with Us: Chat

FREE Shipping on all orders over $49* view details

You are eligible for Free Shipping if:


    • *Your order is $49 or more after all coupons and discounts are applied.

    • *Your order doesn't weight over 20 pounds. Orders overweight will have a surcharge per pound for every pound over 20 pounds.

  • *Your order doesn't have any measurement restrictions may occur. You'll find additional information about measurement restrictions in our Shipping section.
Customer Support:

ChatChat

Email Us Email Us

Tel: +1- 800 - 210 - 0132

  • UPC: 043425082770
  • Manufacturer Part No:
  • This epoxy putty will plug holes and make permanent repairs in moist-surface or under water applications
  • Can be drilled, sanded, filed, tapped, machined, and painted
  • Will even repair leaking fuel tanks
  • Will fully cure in 20-30 minutes
  • Simply pull off the amount of Waterweld necessary for the job, knead it with your fingers until the two colors are thoroughly mixed, then push the product into the hole
  • 300º F maximum intermittent temperature
  • 12000 psi compressive strength
  • 1000 psi lap shear tensile strength
  • Nontoxic and approved by the National Sanitation Foundation for use with potable water
  • Less than 1% shrinkage
  • Carded
  • Light Grey
  • Made in USA
  • 300 F maximum intermittent temperature
  • 250 F maximum continuous temperature

Product Details

  • UPC: 043425082770
  • Manufacturer Part No:
  • This epoxy putty will plug holes and make permanent repairs in moist-surface or under water applications
  • Can be drilled, sanded, filed, tapped, machined, and painted
  • Will even repair leaking fuel tanks
  • Will fully cure in 20-30 minutes
  • Simply pull off the amount of Waterweld necessary for the job, knead it with your fingers until the two colors are thoroughly mixed, then push the product into the hole
  • 300º F maximum intermittent temperature
  • 12000 psi compressive strength
  • 1000 psi lap shear tensile strength
  • Nontoxic and approved by the National Sanitation Foundation for use with potable water
  • Less than 1% shrinkage
  • Carded
  • Light Grey
  • Made in USA
  • 300 F maximum intermittent temperature
  • 250 F maximum continuous temperature