Designed to heat water as opposed to de-icing water, this powerful bucket heater will heat the water to over 180 degree F. A stainless steel guard protects the durable heating element. Water can be heated towards boiling, depending on the bucket's volume and insulation. It comes with a 6-foot cord and is designed to rest easily inside a 5 gallon bucket. The heater is thermostatically controlled with over-temperature protection. For use in water only.
This Bucket or Utility De-Icer uses multiple thermostats for efficient operation. Suitable for up to 30 gallon. The low-profile, finned design provides a large surface area, allowing the De-Icer to run cooler while putting out the same amount of heat as conventional De-Icer. This helps reduce the amount of mineral buildup and extend the life of the unit. Can be used in plastic containers. Durable, coated-aluminum base. 6 feet cord with anti-chew protector. Lock N Dry compatible. cULus Listed. 250 watt, 120 volt, 60 Hz.
This easy-to-install snap-on guard may be used with floating, sinking or 2-in-1 de-icers. Guard is specially designed to protect rubber, plastic or structural-foam tanks. Also protects livestock from contacting the de-icer heating element. Easy to install. Rugged and weather resistant.
The Floating De-Icer will keep a stock tank completely ice-free all winter. The thermostatic control coupled with thermal feedback protects the unit from overheating and ensures efficient operation. The stainless steel heating element is positioned above the thermostat for safety even in low-water conditions. The float is completely enclosed in a rugged, plastic housing and will not sink over time. Recommended for 70 to 100 gallon of water. 6 feet cord with durable anti-rub protector. Lock N Dry compatible. 1000 watt, 120 volt, 60 Hz. UL Listed, CSA Listed.
The Floating De-Icer will keep a stock tank completely ice-free all winter. The thermostatic control coupled with thermal feedback protects the unit from overheating and ensures efficient operation. The stainless steel heating element is positioned above the thermostat for safety even in low-water conditions. The float is completely enclosed in a rugged, plastic housing and will not sink over time. Recommended for 100 to 300 gallon of water. 6 feet cord with durable anti-rub protector. Lock N Dry compatible. 1500 watt, 120 volt, 60 Hz. UL Listed, CSA Listed.
This 25 feet cold-weather hose is excellent for tasks requiring running water in below-freezing temperatures. Featuring a highly efficient internal heating extrusion, API's heated hose maximizes heat retention. The heating element extends all the way to both ends, eliminating frozen connection points. It features a high-quality 5/8 inch hose with standard brass garden hose fittings and is thermostatically controlled for energy-efficient operation. It can be run continuously or simply plugged in when needed. Lock N Dry compatible. 180 watt, 120 volt, 25 feet.
The sinking De-Icer operates at the bottom of the tank where it is less likely to be disturbed by livestock, protecting both the equipment and animals. The strong, durable, stainless steel heating element is thermostatically controlled for efficient operation. Rugged and weather-resistant construction handles the elements. That thermostatic control coupled with thermal feedback protects the unit from overheating. The thermostat is positioned above the heating element to ensure safety in low-water conditions. Each De-Icer comes complete with a galvanized wire guard for use in plastic tanks. Recommended for use in 100 to 300 gallon of water. 6 feet cord with durable anti-rub protector. Lock N Dry compatible. 1500 watt, 120 volt, 60 Hz. UL Listed.
This 3-in-1 De-Icer easily converts between a floating, sinking or drain-plug De-Icer. To use as a sinking De-Icer, simply remove both the cover and float, then turn the unit over to rest on its sturdy feet. To use in your tank's drain plug, remove the cover and float and use the patented drain plug adapter to route the cord through the drain hole. Energy-efficient operation keeps the entire tank (recommended for 100 to 300 gallon tanks) ice-free without over heating the water. Multiple thermostats separately monitor water and heating element temperatures to provide efficient and safe operation. The sturdy, finned base spreads the heat across the water allows the unit to run cooler to the touch while still putting the maximum amount of heat into the water. Cooler operation and a non-stick coating helps resist mineral buildup. Can safely operate in any plastic or metal tank without the use of a guard. 6-foot cord with anti-rub protector. cULus Listed. 1500 watt, 120 volt, 60 Hz.
Material: Fir wood. Comes with wheels, large nesting box, slanted roof, hardware packet, shingles, chicken wire and manual. Slanted roof for protection. Houses up to 4 chickens. Assembled dimensions: 30.5"W x 38.5"D x 37"H.
This honey gate is made of high-quality plastic and can be used in a variety of different-sized buckets to best suit your needs. It fits through a 1.75 inch hole and comes with a plastic nut to keep it tightly sealed. A metal wing nut holds the gate opening securely in place until it is time to let the honey flow through it.
This dependable, float-controlled model simply hooks up to a standard 3/4 inch garden hose to automatically deliver fresh water 24-7 in above-freezing temperatures. The large 4-gallon capacity is perfect for thirsty horses. Includes metal brackets for over-the-fence or on-the-wall installation. Molded from impact-resistant polyethylene resin. Operates at pressure between 20 and 50 psi. Includes 30 inch of hose with a female hose attachment. Measures 14.25 inch long by 17.5 inch wide by 10.75 inch high.
Heavy-gauge galvanized steel scoop with riveted handle. Perfect for scooping grain but heavy-duty enough to handle pelleted hay and feeds. Flat end for easy storage. This is the scoop you want if you are looking for long wear and years of service. 7 inch long by 6.5 inch wide by 8.5 inch high, 3-quart capacity.
Heavy-gauge galvanized steel scoop with riveted handle. Perfect for scooping grain, but heavy-duty enough for pelleted hay and feeds. Flat end for easy storage. This is the scoop you want if you are looking for long wear and years of service. 6.75 inch long by 7 inch wide by 11.812 inch high, 4-quart capacity.
This dependable, all-purpose automatic waterer is easy to connect to pipe, flex hose or garden hose water supply. Works well for horses, cattle, hogs, goats and other outside animals, with no special training required. Not intended for use inside a home. Safely operates between 20 and 50 psi pressure. Constructed from heavy-gauge, prime-quality drawn, galvanized steel. Can be easily installed at any height using lag bolts or through bolts. Mounting plates are included but other mounting and water connection hardware are not included. Recommended mounting hardware to fence two 3/8 inch diameter bolts or two 3/8 inch lag screws. Mounting to a wall two 3/8 inch lag screws. Will fit a 1/2 inch pipe or hose with a left or right connection. Measures 10 inch long by 10.75 inch wide by 5.5 inch high.