Clean surfaces to be soldered by removing all rust, grease, dirt, paint, etc. Cleaning can be done with steel wool, sand paper, etc. Heat parts to be soldered with a soldering iron or torch, so that the acid core solder, when fed to the heated joint, will melt. Remove solder, then the heat source. Allow to cool and remove any flux residue with a warm, damp cloth.
The Alpha Fry electrical rosin core solder for your home improvement projects and repairs. Complete general electrical work with the 40 percent tin and 60 percent lead material. It can reach up to 460 degree Fahrenheit before melting. This means it can get very hot without causing any issues to the rosin solder wire.
Brand new superior qualitysolder lesscopper bonding Pro brought to you by Just For Copper is up to 80% faster than hot soldering. No heat is required, and bonds all copper and brass pipes and fittings, even if pipes are wet. It sets in only 10 seconds, cures in 7 minutes and easily makes up to 40 welds. The best value for a great quality innovative product.
Nokorode soldering flux has been the brand preferred by professionals for over 100 years. They use it to clean and flux copper pipe in one operation, saving time and money. The creamy formula flows smoothly into even the smallest cavity. Joints using Nokorode are strong, leak free, stay active in excess of 800 degree and do not liquefy in hot temperatures or become brittle in severe cold. Nokorode flux is 100 percent lead free and odorless.
The brand new superior quality epoxy putty brought to you by Just For Copper is great for leak repairs. It hardens in just minutes and provides permanent repairs on almost anything such as metal, glass, ceramic, fiberglass, concrete, wood, plastic, and more. Easy to use.
Lead-free rosin core solder is designed for fine electrical soldering requiring lower temperatures. It has a 430 degree Fahrenheit melting point and is made from 96 percent tin. The lead-free solder is carded for ease of use. It has a diameter of 0.062 and is 1/20 Oz.
This can be used for joining silver, nickel and copper alloys. This solder flux paste kit is made from 98 percent tin and 2 percent silver. It has a melting point of 450 degree Fahrenheit and can be used for non-electrical applications. It contains 0.75 Oz. of solder and 25 Oz. of flux.